The Multi Function control unit (MCU) allows easy operation of essential Driver Inputs such as Indicators, Wipers, Etc.. from the Hand Control Grip.

The tactile switch on each end of the Hand control Grip allows easy selection of different functions.

Simply press the required switch with the hand and let the unit scroll through its choices.

The inbuilt Buzzer allows the user to know exactly what function they have selected

The MCU may also be used in single switch mode, e.g.. a foot switch, to operate selected functions.

The MCU may also be programmed for specialised tasks to suit the client.

Bellows type Air switches and foot switches are also available to give a wide range of mounting options.

Other Features

• Holding either Button ON will cause the unit to proceed through it's selections.
• Simply count the number of beeps required then release the button and the unit will operate the selected function.
• The Indicators are set to self cancel after about 10 seconds of operation. If the Brake is applied the Indicators will remain on. Every time the Brake is applied the timer goes to 10 seconds again.
• The Indicators may also be quickly cancelled by selecting them again.( 1Beep)
• Indicators, Wipers, High beam are able to be toggled on or off by selecting again.
• The Wiper off and Low beam are selected quickly by bumping the relevant switch.
• The wash cycle runs to a preset time and cannot be stopped during its cycle.
• The Horn will sound for as long as the button is held on when selected